Buy 25 cases of product, get 1 FREESHOP NOW

DAC Industries

Dedicated to Quality Products, Integrity and developing Lifelong Customer Relationships.

Popular Products

All Pur­pose Foam was for­mu­lated to elim­i­nate costly prob­lems from rust for­ma­tion on the backs of molds, paint soft­en­ing on expen­sive equip­ment, and costly down time caused by gas build-up in vents.

Mois­ture Guard is a dis­tinc­tive for­mu­la­tion that was devel­oped to max­i­mize per­for­mance in short and long term mois­ture dis­place­ment and rust pre­ven­tion sit­u­a­tions.

This non-silicone, fully paintable release con­tains lecithins, unlike some food grade sil­i­cone. The DAC All Pur­pose Mold Release prin­ci­ple is approved as a direct food addi­tive. This uni­ver­sal mold release may safely be used on all ther­mo­plas­tics, includ­ing poly­car­bon­ates, styrenes, acrylics, and other sen­si­tive plas­tics used in ure­thane R.I.M. molding.

Uni­ver­sal II All Pur­pose Degreaser has unique ion dis­burse­ment capa­bil­i­ties pro­vid­ing rapid clean­ing and degreas­ing along with removal of body oils and fin­ger­prints, to allow supe­rior appli­ca­tion of plat­ing agents and lubri­cants.

Wear Guard 2000 is an anti-wear and lubri­ca­tion pack­age for medium tem­per­a­ture mold­ing require­ments. Wear Guard 2000 elim­i­nates the high cost of expen­sive plat­ing agents. Wear Guard 2000 Should be used on all mov­ing parts, slides, cams and pins where galling may occur

Unsure What Product You Need?

Let the experts at DAC Industries help guide you to the right solution.

Our industry knowledge is based on over 30 years of experience working with customers such as yourself and have dealt with nearly every problem imaginable. If your problem is new to us, we will not stop investigating until we have found a solution for you. Trust DAC to be your problem-solving resource any time, every time.

Why Our Products?

DAC Industries has developed and refined our formulas to perform better than the competition. We have removed unnecessary fillers that are ineffective and concentrate only on using ingredients that get the job done with minimal effort. If you still do not believe us, try a sample of any of our products for free.

Contact Our Team

Have any questions, concerns, comments, or complaints? They are all welcome! Reach out to one of our team members and we will be happy to assist you.

Free Sample Products

Test how well DAC products work. Try a no-risk sample for free. If you are happy with our products and decide to buy, you will get a 10% discount on your first order.

Safety Data Sheets

Safety Data Sheets are available for download in both English and Spanish (other languages available on request). Click the link below for our full list of products.

Cleaners


DAC Industries has an extensive offering of cleaners including degreasers, resin removers, and all-purpose foam. We have formulated the cleaning sprays to break down the toughest buildups, making it easier and faster to clean your mold tooling. Regular use of cleaners extends the life of your tooling, saving you significant costs when you must repair or replace molds, and prevent cosmetic defects due to contamination.

Our products work on poly­styrenes, poly­car­bon­ates, nylon, col­fax, and some del­rins, won’t leave a residue and can be applied in-production to clear blocked vents.

Lubricants


DAC lubrication sprays stop galling and bind­ing of moving parts. Our products are engi­neered to withstand high impact loads and meet close tol­er­ances without bleeding or contaminating parts

Choose from either spray or traditional grease options.

Each DAC lubrication spray will prevent mold damage, galling and binding of moving parts, and cosmetic defects on parts.

Mold Releases


DAC’s mold releases come in a variety of formulas without fillers or solvents that would otherwise contaminate or damage molded parts.

Our lineup carries both silicone-based and non-silicone-based releases for industrial applications.

For more extreme conditions, we also offer plating agents that have a semi-permanent coating that breaking surface friction on textured surfaces or when molding difficult materials.

Rust Inhibitors


DAC Industries Rust Inhibitors have the ideal char­ac­ter­is­tics any molder will value for effi­cient mold­ing.

Our products pre­vent rust and cor­ro­sion, and repel mois­ture, have a thin, dry film that sets up quickly and is eas­ily removed, do not con­tain fillers and do not run, and mold off eas­ily, with no part con­t­a­m­i­na­tion.

These char­ac­ter­is­tics pre­vent costly damage to tools as well as addi­tional mold­ing prob­lems, such as bleed­ing, leech­ing, galling and bind­ing.

When you use a DAC rust inhibitor, you will have peace of mind that your tooling is protected. Our sprays will remain on the mold 2 days, 2 months or 2 years from now. Plus, the color cov­er­age indi­ca­tor option of Dry Film Rust Pre­ven­ta­tive allows you to see exactly where you have sprayed.

For PVC mold­ers, choose from our rust inhibitors with added acid vapor neu­tral­izer capa­bil­ity. The mold sur­face is pro­tected from rust and expo­sure to PVC vapors.

Create an Account Today

By creating an account, you will become part of the growing DAC community.

DAC Community members get special benefits not offered to the public, such as:

Part of our member’s list who receive special promotional offers throughout the year, as well as our newsletter that gives you a first look at tips & tricks, special announcements, news and events and other exclusives.

Simplified re-ordering. With your account, you can view past-orders and resubmit them with a simple click of a button.