PERFORMANCE CHARACTERISTICS:
  • Seals against cor­ro­sion and pre­vents mois­ture with­out bleeding
  • Won’t leech into ejec­tors, cams or core pins to cause bleeding
  • Excep­tional water repelling qualities
  • Increases short and long term protection
  • Rapid flash time
  • Max­i­mum effi­ciency, min­i­mum labor
  • Reduces excess usage and waste
  • Will not induce bleeding
  • Con­tains no fillers, only pure active ingredients
  • Eas­ily removed by flushing
Descrip­tion

DAC-101 Mois­ture Guard is a dis­tinc­tive for­mu­la­tion that was devel­oped to max­i­mize per­for­mance in short and long term mois­ture dis­place­ment and rust pre­ven­tion sit­u­a­tions. We are all well aware of the cost involved by rejected parts due to mark­ing. This is typ­i­cally caused by excess pen­e­tra­tion of prod­uct into ejec­tor pins, cams, and slides. DAC-101 Mois­ture Guard elim­i­nates this prob­lem entirely due to its rapid flash time, pre­vent­ing run­ning or drip­ping and there­fore will not induce any kind of con­t­a­m­i­na­tion due to leech­ing or bleed­ing. A light coat­ing of DAC-101 Mois­ture Guard is all that is needed. Once applied it will remain active for extended peri­ods of time.

REMOVAL SPECIFICATIONS:

Due to Mois­ture Guard’s unique for­mu­la­tion it can sim­ply and eas­ily be removed by flush­ing with DAC-103 Uni­ver­sal All Pur­pose Degreaser with no risk of contamination.

Mois­ture Guard dis­places mois­ture and pro­vides a coat­ing of excel­lent film strength which pro­tects molds from both short and long-term corrosion.

NFPA Hazardous Materials ID System
Health1
Flammability4
Reactivity3
OtherSee SDS

pdf (1) Safety Data Sheet

Call for Orders, Prod­uct Infor­ma­tion and Tech­ni­cal Sup­port:
1–800-830‑3423