Why was SUPER LUBE developed?

DAC Cus­tomers expressed a desire for a com­plete fam­ily of lubri­ca­tion and anti-wear prod­ucts that will per­form over a wide range of oper­at­ing tem­per­a­tures under vary­ing conditions.

Super Lube was for­mu­lated to pro­vide opti­mum lubri­ca­tion and anti-wear per­for­mance under high oper­at­ing tem­per­a­tures of 300 F to +900 F.

DESCRIPTION:

Super Lube is an excel­lent anti-wear and lubri­ca­tion pack­age for high tem­per­a­ture mold­ing require­ments. Super Lube is a dry for­mula that will not cause bleed­ing or con­t­a­m­i­na­tion. This is an excel­lent choice for med­ical mold­ing. Super Lube exhibits supe­rior EP film strength. Use Super Lube on all mov­ing parts and injec­tion sys­tems to elim­i­nate galling and binding.

PERFORMANCE CHARACTERISTICS:

  • Use on all mov­ing parts, includ­ing slides, cams, pins and core pins
  • Supe­rior lubri­cant with excel­lent EP film strength to elim­i­nate bleed­ing, galling and bind­ing in injec­tion mold­ing systems
  • Tem­per­a­ture range from 300 F to 900 F
  • Adjustable spray tip

CAUTION:

To main­tain max­i­mum per­for­mance, do not use in con­junc­tion with any min­eral oil or lithium based prod­ucts. Use in well-ventilated area. Store at room tem­pera­ture below 120 F.

NFPA Hazardous Materials ID System
Health1
Flammability4
Reactivity3
OtherSee SDS

pdf (1) Safety Data Sheet

Call for Orders, Prod­uct Infor­ma­tion and Tech­ni­cal Sup­port:
1–800-830‑3423