Why was Wear Guard 2000 developed?

Our Cus­tomers expressed a desire for a com­plete fam­ily of lubri­ca­tion and anti-wear prod­ucts that will per­form over a wide range of oper­at­ing tem­per­a­tures under vary­ing conditions.

Wear Guard 2000 was for­mu­lated to pro­vide opti­mum lubri­ca­tion and anti-wear for medium oper­at­ing tem­per­a­tures of 0 F to +600 F.


Wear Guard 2000 is an anti-wear and lubri­ca­tion pack­age for medium tem­per­a­ture mold­ing require­ments. Wear Guard 2000 elim­i­nates the high cost of expen­sive plat­ing agents. Wear Guard 2000 Should be used on all mov­ing parts, slides, cams and pins where galling may occur.


  • Supe­rior film strength pro­tects against galling and binding
  • Elim­i­nates all chance of bleed­ing through ejec­tors, cams and lifters
  • Excel­lent prod­uct for tem­per­a­tures 0 F to 600 F
  • Supe­rior film strength
  • Excel­lent lubrication
  • Anti-wear pro­tec­tion
  • User friendly
  • No bleed­ing
  • Dry film


To main­tain peak film strength per­for­mance, do not use in con­junc­tion with any min­eral oil or lithium based prod­ucts. Use in well-ventilated area. Store at room tem­per­a­tures below 120 F.

HMIS Hazard Rating System
OtherSee SDS
Safety Data Sheet

Call for Orders, Prod­uct Infor­ma­tion and Tech­ni­cal Sup­port: